Plastiform P51SD Replicating Compounds

SKU: CA-P51SD-2
£65.00 Ex. Vat
£65.00

The P51 SD is the most rigid product in the range. Its final impression has a hardness of 51 Shore D (100 Shore A) and is brittle: it cannot be deformed during demoulding. This plastiform therefore does not accept any Extraction Stress (0%) and polymerizes quickly in about 1 minute.

The P51 SD has been specially developed for clearance, spacing and air gap control. It is indeed capable of being crushed up to a thickness of 0.1 mm. Its pasty consistency prevents it from flowing, making it easy to position on any type of control surface. Thanks to its hardness, it is also used to carry out simple dimensional inspection, which does not present any difficulty during extraction.

This plastiform is particularly compatible with contact measuring machines. Using the P51 SD is sometimes a good alternative to other products in this context.

Technical Specs

Micron Accuracy

This product accurate to 1 Micron

Gap measurement

P51SD is recommend for Gap measurement and spacing control, spacing or air gap.

1 Minute

Cure time of 1 Minute at 20 Degrees

51 Shore D

The P51 SD is the most rigid product in the range. Its final impression has a hardness of 51 Shore D (100 Shore A) and is brittle

Cannot be Sliced

With its 51 Shore D hardness this product cannot be sliced

50ml Cartridge

P51SD is supplied in 50ml Cartridges for use with the nozzle based system.

Pasty

As a Pasty or non-flowing product, P51SD can to be applied to vertical or overhanging surfaces.

Coral

P51SD can be identified with its Coral colour

You May Also Like