Plastiform M80 Lp - Manual Replicating Compounds

SKU: MT-005-B
£31.00 Ex. Vat
£31.00

This products has been developed to meet a need for long-term polymerization. M80 Lp can be applied like all other Plastiform malleable products but has a cure time of 30 minutes. Its final impression is Semi-Rigid (hardness 80 Shore A), therefore non-flexible. This replica cannot be deformed during its demoulding, and does not support any extraction stress. The M80 should therefore only be used on simple shapes or for partial impressions.

The extended polymerization of the M80 Lp allows it to be used for long applications. It is a very specific product that meets specific needs. We recommend that you contact one of our experts if you plan to use it.

The M80 is particularly recommended for clearance and air gap control on assembled assemblies. Its capabilities also allow it to be used in injection moulds. Finally, this plastiform temporarily stiffens fragile parts before machining against vibration and resonance phenomena.

It is possible to cut the M80 Lp impressions with the Double Blade Cutter to obtain a profile of the replica.

Technical Specs

M80 Lp is a very specific product that meets specific needs. We recommend that you contact one of our experts if you are considering using it.

10 Micron Accuracy

The Manual Product range has an accuracy or +/- 10 Microns

Large Simple Impressions

Designed to meet the need for long working times

25 Minutes

Designed to meet the need for long working times. M80LP has a working time 7 times longer than similar products

80 Shore A

Final hardness of 80 Shore A, meaning a Semi-Rigid Product

Can be Sliced

While the M80 LP can be sliced it is depending on the complexity of the impression.

90ml or 900ml

This product is supplied in 2 pots with an equal split between the total size. ie 90ml = 2x 45ml pots

Manual Putty

This product is a two part putty where 2 equal parts are mixed by hand

Dark Blue

M80 LP can be identified with its Dark Blue colour

You May Also Like