Plastiform F50 Replicating Compounds

SKU: CA-F50-2
£60.00 Ex. Vat
£60.00

F50 is the most versatile product of all Plastiform Products. Thanks to its technical characteristics, it is able to solve most of the industry’s dimensional control problems. Its fluidity and flexibility allow the F50 to easily infiltrate into and out of rooms. In short, it is possible to cut it with the Double Blade Cutter, which makes it very easy to use.

The final impression of the F50 is Semi-Soft (hardness 50 Shore A), and does not have a high deformation capacity. It accepts a maximum Extraction Constraint of 10%, and must therefore be used in forms that are not very complex to unmould.

The F50 is therefore recommended for taking impressions in simple or less complex internal shapes. It is used for both total and partial impressions. 

It is also very effective in creating custom-made protections, caps, and savings against surface treatments.

The impression is very precise, and all surface details (shape, dimension, appearance, surface condition, etc.) are reproduced in µm.

Technical Specs

Micron Accuracy

Plastiform F50 is accurate to 1 Micron

Complex & Simple Internal

Designed to be used in Complex Internal Forms by taking a partial impression. Or simple forms with full impressions

8 Minutes

Cure time of 8 Mins at 20 Degrees

50 Shore A

Final hardness of 50 Shore A, meaning Semi Flexible Product

Can be Sliced

Plastiform F50 is an ideal product to slice with the AC-012. The 1mm Slice can be measured on a profile projector or simliar

50ml Cartridge

F50 is supplied in 50ml Cartridges for use with the nozzle based system.

Fluid

As a fluid product F50 fluid and ideal for Partial impressions of complex internal Bores, and also for simple bores.

Light Blue

F50 is one of the most common products and can be identified with its Light or sky blue colour

You May Also Like