Plastiform M60 - Manual Replicating Compounds

SKU: MT-002-B
£31.00 Ex. Vat
£31.00

With its malleable consistency, M60 can be applied manually to vertical or overhanging surfaces. The final impression of this plastiform is Semi-Soft (hardness 60 Shore A), and has a low deformation capacity. It accepts a maximum Extraction Constraint of 5%. The M60 is therefore used on less complex shapes.

The M60 is recommended for creating simple external shape impressions (threads, grooves, grooves, etc.). It can be used on medium or large parts. Moreover, it is a very practical product to use to control large assemblies without having to disassemble them.

This product can also be used to create custom protective caps. It is possible to cut the M60‘s impressions with the Double Blade Cutter to obtain a profile of the replica. Performing your measurements on 2-dimensional profiles greatly improves the quality of your results.

Technical Specs

10 Micron Accuracy

The Manual Product range has an accuracy or +/- 10 Microns

Simple External

Designed to be used in Vertical or overhanging simple External Forms

8 Minutes

Cure time of 8 Mins at 20 Degrees

60 Shore A

Final hardness of 60 Shore A, meaning a Semi-Flexible Product

Can be Sliced

An ideal product to slice with the AC-012. The 1mm Slice can be measured on a profile projector or similar

90ml or 900ml

This product is supplied in 2 pots with an equal split between the total size. ie 90ml = 2x 45ml pots

Manual Putty

This product is a two part putty where 2 equal parts are mixed by hand

Turquoise

M60 can be identified with its Turquoise colour

You May Also Like