Plastiform F65 Replicating Compounds

SKU: CA-F65-2
£65.00 Ex. Vat
£65.00

F65 is a product with low fluidity, which allows you to pour it into poorly positioned parts. The final impression is Semi-Flexible (hardness 65 Shore A), and inelastic. It can hardly be deformed when demoulded, and should therefore not be used in complex shapes.

The impression of this plastiform only accepts a 5% Extraction Stress. The F65 is specifically designed to create custom savings, plugs or masking joints. It is a very good product to use to protect certain parts of a part during surface treatment:

  • Sandblasting, shot blasting,
  • Chemical treatment,
  • Heat treatment,
  • Polishing,
  • Anodizing,
  • Chrome plating.

It is possible to cut the F65 with the Double Blade Cutter to obtain cross sections of your replicas and study them more easily.

Technical Specs

Micron Accuracy

Plastiform F65 is accurate to 1 Micron

Masking and Sealing

Typically used to mask or seal parts that are to undergo treatments when you wish to protect certain areas

6 Minutes

Cure time of 6 Mins at 20 Degrees

65 Shore A

Final hardness of 65 Shore A, meaning a Semi-Flexible Product

Can be Sliced

Plastiform F65 can be slice with the AC-012. The 1mm Slice can be measure on a profile projector or similar

50ml Cartridge

F65 is supplied in 50ml Cartridges for use with the nozzle based system.

Fluid

As a fluid F65 ideal for filling and protecting internal cavities and bores

Dark Orange

F65 is can be identified with its Dark or Burnt Orange colour

You May Also Like