KD-032 - Internal Simple Forms Kit

SKU: KD-032

£407.00 Ex. Vat
£407.00

The Simple Internal Forms Kits is perfect introduction into using Plastiform where your simple internal parts need to be inspected. Including F50, F65 & F85. The KD-032 contains a great selection of products, and is ready to go straight out of the case.

The fluid products, can easily be applied inside any kind of simple part to obtain a complete internal replica. The products give Semi-Flexible or Rigid impressions, that should be taken from parts where there is no undercuts or complex forms. 

The kit contains our popular double blade cutter which can be used to take a 1mm slice through your impression for easier measurement. 

Replicas can be inspected on Profile Projectors, Vision systems or similar. 

Technical Specs

Micron Accuracy

Plastiform products are accurate to 1 Micron

Internal Simple

Perfect introduction into using Plastiform where your simple internal parts need to be inspected

1 - 8 Minutes

The 3 compounds cure between 1 and 8 Minutes at 20 Degrees

20 - 50 Shore A

A mix between 50 and 85 this kits gives a good scope of products for simple forms

Whats in the Box?

Compounds

F50 x2, F65 x2 and F85 x1 - 50ml Cartridges

Cutter and Support

The Double Blade Cutter is an essential accessory in the Plastiform range. It allows profiles for inspection on optical measuring devices

Nozzles & Tips

20 Grey mixers nozzles and 6 of the mixer tips to suit

Application Gun

Used with 50ml Plastiform Cartridges it ensures an accurate and constant mix of the two components

Removal Aids

A mix of De-moudling rings and Plastin gives you plenty of options.

De Greaser

Ensure your parts are free from grease with the our 400ml De Greaser spray

Case

A hard and durable case to store everthing you need all in one place

Instructions

With a product chart and instruction for each product you'll have no problems using Plastiform

You May Also Like